Holden 520 - DND Services Ltd

Home

Latest News

About Us

Decode

Other manufacturers...

DND Services Ltd :: Database :: Decode - E-Code Service :: Holden 520

Holden 520

7 642 385 510

Radio Code & Decoding Service

Holden 520
Blaupunkt 7 642 385 510

As originally fitted to :

Holden Vehicles

This radio is designed to fit Holden vehicles that utilise a seperate display on the dashboard. It cannot be used in other vehicles that do not have this seperate display fitted.

If the unit is codelocked it will need to be left switched on up for up to two four hours to reset before another code entry attempt is possible. If it does not reset after this time, then all of your code entry attempts may have been used up, and the unit will need to be sent to us to be decoded and reset. Please contact us for the cost of this service.

If you have lost your radio code, We can supply the Security Code for this Radio using our online E-Code service. Simply submit your Radio details via our online form, and then sit back and wait for us to E-Mail your Code number back to you

At present, we have very little other information on our database regarding this stereo. We would gratefully welcome any extracts that you could send us from either the instruction or installation manuals so that we may update our records and help others with any technical assistance.

Removal of the radio is fairly straightforward. You may need to first remove the four small Allen Key grub screws in the front panel to expose the holes used for the removal tools. The removal tools (2 sets required) are inserted into the four round holes at the sides of the fascia until a click is felt. The radio can then be withdrawn and the leads unplugged.

Code Entry as Follows:

Switch On Ignition (No Need To Start Engine)
Turn Off Stereo
Press & Hold Preset " AS " and
Switch Radio On - Display Shows
" SAFE " And Then Shows " 10 - - - - "
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press & Hold Preset " AS " Until the Unit Beeps

Details