Kdc-5080r - DND Services Ltd

Home

Latest News

About Us

Decode

Other manufacturers...

DND Services Ltd :: Database :: KDC-5080R

KDC-5080R

CD / Tuner

If the display shows "WAITING" and a number then the unit is codelocked and will need to be powered up for up to four hours to reset and allow further code entry attempts. We are able to reset and decode this radio if you send it to us.

To remove the Radio, you will first need to remove the outer trim, this is simply clicked in place, but take care not to pull too hard in case the plastic lugs are damaged. Insert the removal keys down the sides and then withdraw the radio. The leads can then be unplugged.

Removal Tools Required : PC5-106

Accessories Available for this Radio:

PC5-114 Mounting Cage
PC3-451 Power Cord with ISO Plug
PC7-4500 CD Changer data Lead
PC5-27 Aerial Convertor

We are able to supply a compatable CD Changer for this model, please contact us for more information

Demonstration Mode

To switch off the Demonstration Mode briefly press the MENU button until MENU is displayed. Press the AUD button once and the display should show USER. Within 2 seconds press and hold the AUD button once more until BASS is displayed. Press AUD again and a radio channel will be displayed and the set should now function as normal. This procedure is only necessary if the power to the radio has been interrupted.

Common Faults

There is a common fault with this unit where the fascia will appear to be completely dead, and in most cases, this is due to a failed Flexitrack.

J84-0121-12 Flexible

Code Entry as Follows:
Switch Radio On - Display Shows
" CODE - - - - "
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press " DISP/NAMES " to Enter
The Display Will Show " APPROVED "

Details