Nissan 28 113 - 2F000 - DND Services Ltd

Home

Latest News

About Us

Decode

Other manufacturers...

DND Services Ltd :: Database :: Nissan 28 113 - 2F000

Nissan 28 113 - 2F000

7 646 345 318

Nissan 28113-2F000 Radio Code Decode Service

Blaupunkt Radio / Cassette as fitted to a wide range of Nissan Vehicles including the Micra.

This stereo is specifically coded to the engine management system of the vehicle it came out of using very sophisticated technology. When it is first powered up, it will communicate with the engine management, and a message of "WAIT" or "SECURITY" will appear whilst this process is in operation. If communication has been successfull, it will prompt for the code to be entered as shown below. If your radio is asking for a Code "----", and you do not know it, then we are able to supply your code number via email if you follow the instructions on the link below.

However, if plugged into another vehicle other than the original one, it will not recognise the engine management and may not allow a code to be entered. If the display shows the error message of "SECURE" then it will have to be sent to us to be reprogrammed for use in your vehicle.

Full details of our "SECURE" repair service can be found on our website

This radio is bolted in place by four bolts, and these will be hidden beneath the dashboard trim. Removal of the trim will depend largely on the vehicle it is fitted to, but should not present any real problems. Please contact us for details if you are unsure how to go about this. Once the four bolts that secure the radio frame have been removed, the stereo will come out in a rather large lump and can then be unplugged.

If you intend replacing this Stereo with an Aftermarket one, you may need the following:

PC2-13-4 Nissan to ISO Adaptor Lead

Accessories Available for this Radio:

PC3-204 Nissan Power Cord / Repair Loom Assembly

Code Entry as Follows:
Switch Radio On - Display Shows
" WAIT "
" CODE "
(This May Take A Few Minutes - Be Patient)
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press Tuning Up Button " ^ " To Enter

Details