DND Services Ltd :: Database :: Decode - Instant Radio Code Service

Home

Latest News

About Us

Decode

Other manufacturers...

DND Services Ltd :: Database :: Decode - Instant Radio Code Service :: Lexus P3703

Lexus P3703

KEX-P8256ZT / 86120 - 50380

Radio Code & Decoding Service

Lexus P3703
86120 - 50380
Pioneer KEX-P8256ZT

As originally fitted to the :

Lexus GS300

Please note that code entry is only possible with the ignition switched on, and in the order shown. If the display continually shows "HELP" then the unit may be codelocked and will need to be reset before another code entry attempt is possible. Our Code Service will also include a solution to reset the HELP message.

If you have lost your radio code, the Security Code for this Radio is available NOW using our fully automated INSTANT RADIO CODE service, even if the display says HELP. Once your Radio details have been submitted, your Code solution will be ready - Instantly !! - No Waiting !!

Removal of the radio can appear a little daunting, but is actually quite straightforward if you take a little time and care. Generally, if fitted to a GS300, then the removal instructions are as follows. Grab hold of the lower ashtray internal compartment and pull forwards, this is held in with sprung clips, but will release with a bit of pressure. The cable is long enough to be put aside without unplugging. Gently prize forwards the upper air vent and display panel. This too will come forward, but will take a bit of effort to get it started. Be careful not to mark anything if using any form of prying bar. Once removed and put to one side, the two upper and two lower bolts are visible which are retaining the rest of the radio and air con section. Once removed, the leads can then be unplugged. The radio is then unbolted from the frame by two large screws at either side.

Code Entry as Follows:

Switch Radio On - Display Shows
" SEC "
Press & Hold the " TUNE " Button & Preset "1"
The Display Will Show " ^v - - - "
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
If the correct code number is now shown
Press " SCAN " To Enter
The Display Will Show "SEC" And Turn Off

Details