Rover XQD101042PUY - DND Services Ltd

Home

Latest News

About Us

Decode

Other manufacturers...

DND Services Ltd :: Database :: Decode - Workshop Service :: Rover XQD101042PUY

Rover XQD101042PUY

Radio Code & Decoding Service

Rover XQD101042PUY
Alpine

As originally fitted to the :

Rover 75

Please note that code entry is only possible when "CODE" is shown are in the display. If the display continually shows "WAIT" then the unit may be codelocked and will need to be left switched on up for up to two hours to reset before another code entry attempt is possible. If it does not reset after this time, then all of your code entry attempts may have been used up, and the unit will need to be sent to us to be decoded and reset.

If you have lost your radio code, we can decode and reset this radio, but you will need to send the unit to our workshop for this work to be carried out. Approx turnaround time is 48 hours from receipt to dispatch.

Removal of the radio is fairly straightforward. To remove the Radio, you must first remove the trim panel above it. Underneath the walnut trim at the top of the radio is a black plastic under cover that must be prised off to reveal the two screws holding in the walnut trim. Once removed there are two screws at the top edge of the radio, and care must be taken to remove these screws as they are easily dropped down the sides due to their inaccessability. Once removed, insert the removal tools into the lower slots and withdraw the radio. The leads can then be unplugged.

Code Entry as Follows:

Switch Radio On - Display Shows
" CODE "
Press Preset " 1 " and a " 0 " will appear
Press Tuning Up Button " > " For Correct Digit
Press Preset " 1 " to Enter
Press Tuning Up Button " > " For Correct Digit
Press Preset " 1 " to Enter
Press Tuning Up Button " > " For Correct Digit
Press Preset " 1 " to Enter
Press Tuning Up Button " > " For Correct Digit
If the correct code number is now shown
Press Preset " 1 " to Enter

Details

Code Number Recovery :

£35.00 (€ 42.61)

Add to cart