Rover XQE 100 380 - DND Services Ltd

Home

Latest News

About Us

Decode

Other manufacturers...

DND Services Ltd :: Database :: Decode - Instant Radio Code Service :: Rover XQE 100 380

Rover XQE 100 380

7 648 262 042

Radio Code & Decoding Service

Rover XQE 100 380
Blaupunkt 7 648 262 042

As originally fitted to the :

Rover 25
Rover 45

Please note that code entry is only possible "CODE - - - - " is shown in the display. If the display continually shows "CODE WAIT" then the unit may be codelocked and will need to be left switched on up for up to two hours to reset before another code entry attempt is possible. If it does not reset after this time, then all of your code entry attempts may have been used up, and the unit will need to be sent to us to be decoded and reset. Please contact us for the cost of this service.

If you have lost your radio code, the Security Code for this Radio is available NOW using our fully automated INSTANT RADIO CODE service. Once your Radio details have been submitted, your Code will be ready - Instantly !! - No Waiting !!

To remove the Radio, open the two small flaps at either side of the fascia that will reveal the small allen key headed bolts. Unscrew these bolts as far as they will go, taking care not to damage the heads. The bolts will not come out, but are winding back a sliding bar inside the radio. Stop when resistance is felt. You should then be able to then withdraw the radio. The leads can then be unplugged, but it must be noted that this is often a very tight plug requiring the outer clip to be pushed in an upwards direction to release.

Code Entry as Follows:

Switch Radio On - Display Shows
" CODE - - - - "
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press Tuning Up Button " > " To Enter

Details