Vauxhall CAR 2003 (F) - DND Services Ltd

Home

Latest News

About Us

Decode

Other manufacturers...

DND Services Ltd :: Database :: Decode - Instant Radio Code Service :: Vauxhall CAR 2003 (F)

Vauxhall CAR 2003 (F)

7 649 200 323

Radio Code & Decoding Service

Vauxhall CAR 2003 (F)
Blaupunkt 7 649 200 323

As originally fitted to the :

Vauxhall Agila
Vauxhall Corsa
Vauxhall Omega

This radio is designed to fit Vauxhall vehicles that utilise a seperate display on the dashboard. It cannot be used in other vehicles that do not have this seperate display fitted.

Please note that code entry is only possible with the ignition switched on, and in the order shown. If the display continually shows "SAFE" and a number less than "10" then the unit may be codelocked and will need to be left switched on up for up to two hours to reset before another code entry attempt is possible. If it does not reset after this time, or the display shows "SAFE" with no number to the left, then you are not following the correct code entry procedure, and your ignition has not been switched on. If all of your code entry attempts have been used up, the unit will need to be sent to us to be decoded and reset. Please contact us for the cost of this service.

If you have lost your radio code, the Security Code for this Radio is available NOW using our fully automated INSTANT RADIO CODE service. Once your Radio details have been submitted, your Code will be ready - Instantly !! - No Waiting !!

Removal of the radio is fairly straightforward. You may need to first remove the four small Allen Key grub screws in the front panel to expose the holes used for the removal tools. The removal tools are inserted into the four round holes at the sides of the fascia until a click is felt. The radio can then be withdrawn and the leads unplugged, although the cage and leads will probably remain fixed to the car.

Code Entry as Follows:

Turn Off Stereo
Switch On Ignition (No Need To Start Engine)
Press & Hold Preset " AS " and
Switch Radio On - Display Shows
" SAFE " And Then Shows " 10 - - - - "
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press & Hold Preset " AS " Until the Unit Beeps

Details